DETAIL

Motorbike

LEARN MORE

MOTORCYCLE CAR CLUTCH BRAKE BLEEDER HOSE ONE WAY VALVE TUBE

AG0707

●Bleed motorcycle brakes quickly and easily with the little bleeder
●Internal valve prevents air being drawn into the system
●Easy to use, simply connect and pump
●Aluminum body to resist corrosion from brake fluid, unscrews for easy cleaning
●Complete with rubber tubing
●How to Use : 
1. Uncover the bleed nipple of the caliper
2. Place the end of the hose onto the bleed nipple and secure with hose clip
3. Check that the valve unit is facing the correct way, the direction of arrow onthe unit should be pointing away from the caliper
4. Have a container ready to collect the brake fluid that will be flushed out ofthe system
5. When ready, Start Pumping the brake Lever and topping up the fluid until allair has been flushed through and the fluid level is correct in the mastercylinder reservoir. close reservoir
6. Remove the hose from the bleed nipple, clean away any excess fluid and replacecover onto the nipple
7. Dispose of any excess brake fluid as per the manufacturer's instructions
8. The valve unit and hoses should be taken apart and drained thoroughly, openthe valve unit by unscrewing the body
●Material : aluminum & rubber
total length : 17.72 in (450 mm)
valve length : 2.17 in (55 mm)
tube inner diameter : 0.2 in (5 mm)
tube outer diameter : 0.31 in (8 mm)