2018

Products of 2018

LEARN MORE
60 Items

VIBRO IMPACT 1/2" DR. ADAPTOR HAMMER

Operation with air hammer, special designed for loosen rusted or tight screws
Contents :
1 pc x  handle
1 pc x  vibro impact 1/2" Dr. adaptor hammer

3/4" DR. VOLVO (FM12) HYDRAULIC LIFT CYLINDER REMOVER / INSTALLER SET

Application : VOLVO (FM12) truck after 2005 

This tool is designed for removing and installing the oil seal of hydraulic lift cylinder

MERCEDES-BENZ (M278) INJECTOR NOZZLE REMOVER

Designed for removing the petrol injector using a slide hammer or T bar on 4.6 to 5.5 litre petrol engines

Applications : M133, M152, M157, M270, M274, M276, M278 engines

MERCEDES-BENZ (M278) INJECTOR NOZZLE INSTALLER

For restoring fuel injectors immediately after calibration of the sealing rings
Application : MERCEDES-BENZ with M133, M152, M157, M270, M274, M276, M278 engines for most 4.6 to 5.5 litre petrol engines

VIBRO IMPACT DRIVER SET

Operation with air hammer special designed for loosen rusted or tight screws
Bit material : S2
Contents : 
5/16" x 35 mmL x phillips No. 2
5/16" x 35 mmL x slotted 8 mm
1 pcs x handle
1 pcs x vibro impact bit

JAGUAR / LAND ROVER 3.0D FUEL PUMP HOLDING TOOL

3 PCS LIGHT DUTY SCRAPER TOOL KIT-STRAIGHT

Multiple uses for delicate surface finishes and close tolerance components

Unique tips ensure economical, consistent and aesthetic removal

Offers control and precision during delicate assembly, repair or restoration work

3 PCS LIGHT DUTY SCRAPER TOOL KIT-ANGLED

Multiple uses for delicate surface finishes and close tolerance components

Unique tips ensure economical, consistent and aesthetic removal

Offers control and precision during delicate assembly, repair or restoration work

3 PCS LIGHT DUTY O-RING REMOVAL TOOL KIT

Removing / manipulating O-rings, small seals / gaskets, clips

Handling delicate wiring, composite electrical connectors

Accessing difficult to reach access panels

Cleaning tight gaps in interior components

IPR SOCKET FOR FORD 6.0 L AND INTERNATIONAL DIESEL

This regulator is located in a very tight location, the tool is built to bottom out on the regulator hex so it does not put torque on the connector incase the regulator can be reused
Use with 3/8" Dr.

 

3PCS CRANK BOLT SOCKET SET

Deep counter-weighted sockets to add more torque to break loose stubborn crank bolts specifically for HONDA and TOYOTA
The set includes 17 mm , 19 mm , 21 mm
Applications :
A. HONDA-ACURA, models : ACCORD, CIVIC, PILOT, CRV, ODYSSEY, CL TL INTEGRA, MDX vehicles B. TOYOTA-LEXUS, models : CAMERY, COROLLA, 4 RUNNER, SEQUOIA, ES300, LS400 vehicles C. any vehicle with a 17, 19, or 21 mm crank bolt

 

BRASS TUBE PIPE STRAIGHTENING TOOL

Easily and accurately straightens light wall tube
The tool for all the popular brass tubes in both 1/4", 3/8", 5/16"

RATCHET EXTENSION DRIVE BAR AND LOW PROFILE SOCKET SET

3 PCS BRAKE BLEEDER 6 PT DEEP OFFSET BOX WRENCH SET

Set for fastening and loosening brake bleeder valves
Offset design enables working in confined areas
Extra thickness on wrench wall enhances coverage on bleeder valves, reventing undesired brake-off on rusty bleeder screw
Double ended with sizes in metrics and inches for most common vehicles on market
Size : 8 x 10 mm , 3/8" x 17/16", 9 x 10 mm
Application :
8 mm : CHEVROLET, FIAT, FORD, MERCEDES, PORSCHE
9 mm : BMW, MERCEDES, VOLKSWAGEN
10 mm : AMERICAN and JAPANESE vehicles
11 mm : BMW, MINI, VAG
3/8" : AMERICAN vehicles
7/16" : FORD, MAZDA, MERCURY

 

DRIVE SHAFT NUT REMOVER AND INSTALLER TOOL FOR BMW

This tool is designed for installing and removing the screw nut between rear drive axle and the differential also can be used to replace the seal of the differential shaft
Application : BMW rwd and 4wd series

 

 

OIL FILTER SOCKET FOR TOYOTA, LEXUS - 1/2" DR. X 14 PT X 64.5 MM

Specially designed for plastic oil filter cap of TOYOTA, LEXUS

Made of steel high quality

Size:1/2" Dr. x  14 pt x 64.5 mm 

Application:TOYOTA : 3.5L since 2007 LEXUS : IS250, IS350, GS300, G S350, GS450H, S350, RX350, LS460, LS600H

 

 

THERMAL IMAGING CAMERAS

The thermal imager camera can measure from -20 - 350°c (-4 - 662°f) and displays the thermal image and temperature. Furthermore, thermal images can be saved to a micro sd card. Transferring images to the software is included for image report generation from these saved images

 

 

 

 

 

 

 

 

VOLVO DIESEL FILTER WRENCH

special designed to remove and install fuel filter on volvo diesel engine

Application : VOLVO C30, C70, S40, S60, S80, V50, V60, V70, XC60, XC70, XC90

ZC0401~ZC0402

ADD TO INQUIRY

2 IN 1 DIGITAL TORQUE TIRE PRESSURE GAUGE ADAPTER

Digital torque value reading
Accuracy : ± 2.0 %
Target value setting
Selectable units : kg-m / kg-cm / ft-lb / in-lb / n.m 
Peak & track mode selectable
50 data memory
Auto shutoff after 60 seconds  
Powered by 2 x AAA battery (included) 
Operating ambient temperature : -10 ~ 60℃ (13.9 ~ 139℉)
Alarm : led light bar alarm and buzzer  
Weight : 230g (batery included)  
pressure range : 1-100psi
pressure units : kpa, bar, psi, kg/cm
ZC0401 : size : 3/8" Dr. x 75 mmL x 45 mm x 67 mm torque range : 3/8" Dr. 27 - 135 Nm
ZC0402 : size : 1/2" Dr. x 75 mmL x 45 mm x 67 mm torque range : 1/2" Dr. 40 - 200 Nm

 

 

FUEL HIGH PRESSURE INJECTION PUMP SPROCKET TOOL REMOVER - HYUNDAI / KIA

Used to remove the high pressure diesel fuel pump sprocket on HYUNDAI, KIA 2.0 / 2.2

10 PCS BRAKE BLEEDING TOOL SET

Contents :
1 pc - 9 x 12 mm wrench with BI-color soft grip
1 pc - 9 x 12 mm x 17mm ring box ratchet insert
1 pc - 4.4 mm x 6.4 mm x 2 m transparent silicon hose
1 pc - hex key wrench 3 mm
6 pc - 17H sockets :
1 pc - 17H x 7H x 45 mmL socket   
1 pc - 17H x 11H x 12 mmL socket
1 pc - 17H x 11H x 39 mmL socket  
1 pc - 17H x 11H x 60 mmL socket
1 pc - 17H x 11H x 70 mmL socket  
1 pc - 17H x 11H x 85 mmL socket

 

 

BELT TENSIONER WRENCH WITH LOCKING PIN ( CITROEN / PEUGEOT / FIAT / FORD )

Facilitates the pre-tensioning and locking of V-ribbed belt tensioners
This tool allows for the removal / installation of the V-ribbed belt in situ on the vehicle even in very limited space conditions
Application : CITROEN / PEUGEOT / FIAT / FORD 1.4L / 1.6L diesel engines

 

 

 

 

ROOF GRAB HANDLE RELEASE TOOL (VAG)

The release tool serves to remove the roof grab handle without causing damage
Application : VW GOLF 2013 >, GOLF VARIANT 2013 >, GOLF ESTATE 2014 >, VW TIGUAN 2016 >, SEAT ATECA 2016 >

GEARLESS BRAKE CALIPER TOOL

Applicable to 1, 2, 4, 6 and 8 mulit-piston calipers
3 pair pad include :
90 mm (L) x 60 mm (W) for 1 and 2 piston brake calipers
148 mm (L) x 60 mm (W) for 4 piston brake clippers
180 mm (L) x 60 mm (W) for 6 and 8 piston brake calipers
Gearless structure for quickly and easily used with small operation angle

 

 

 

HEATER HOSE DISCONNECT TOOL (FORD)

Disconnects the heater hose fittings on FORD FOCUS 2.0L (2012 ~ 2016) / ESCAPE 2.0L ECOBOOST (2013 ~ 2016) and more
These type of fittings are close to the firewall behind the engine and are difficult to turn

 

BRAKE LINE STAPLE TOOL SET 3/16" (4.75 MM) & 1/4" (6.3 MM)

BALL JOINT REMOVAL TOOL (SUBARU / SAAB)

Removal of stubborn front suspension ball joints for subaru / saab vehicles
will not harm suspension knuckle, also saving time

 

OIL FILTER WRENCH (HYUNDAI / KIA)

The wrench is designed specifically to service HYUNDAI / KIA vehicles with 2.0L or 2.2L diesel R-engine

HOSE CLAMP REMOVAL TOOL WRENCH

Application : VW, AUDI, SEAT, SKODA, BMW, PEUGEOT, CITRON, DAC IA, FIAT, FORD, KIA, LEXUS,MAZDA, MERCEDES, NISSAN, OPEL, VAUXHALL, PORSCHE, RENAULT, TOYOTA, VOLVO, etc

RADIATOR / COOLANT CAP WRENCH ( FORD / LAND ROVER / MAZDA / VOLVO )

Can be used to loosen stubborn caps on radiators and reservoirs

Especially suitable for use in tight spaces

HEADLIGHT ADJUSTING WRENCH (MERCEDES)

The wrench is especially suited to areas with very restricted access

Length 195 mm

FUEL TANK LOCKING RING TOOL

This specialized tool is designed to remove  and install the fuel tank locking ring of fca group

CAMBER ADJUSTING TOOL (VAG)

Special 18 mm offset wrench for adjustment of rear axle camber

TRIM REMOVAL WEDGE (MERCEDES)

Uses to remove various trim parts from your MERCEDES-BENZ without damaging the parts

FORD CRANKSHAFT VIBRATION DAMPENER ALIGNMENT TOOL

Application :
engine-1.6L ECOBOOST (110kw / 150ps)-SIGMA / 1.6L ECOBOOST (132kw / 180ps)-SIGMA : FOCUS : 2010-2013engine-1.6L ECOBOOST (110kw / 150ps)-SIGMA / 1.6L ECOBOOST (132kw / 180ps)-SIGMA : C-MAX : 2011engine-1.6L ECOBOOST (132kw / 180ps)-SIGMA : FIESTA : 2013engine-1.6L ECOBOOST (132kw / 180ps)-SIGMA : FUSION : 2013engine-1.6L GTDI : ESCAPE : 2013

 

YM1723B

ADD TO INQUIRY

AUTOMOTIVE U-JOINT PULLER

U-joint puller designed to fit cars, light-duty trucks, and farm machinery, fits U-joints with bearing cups 1.0" to 1.25" O.D.
Eliminates dangerous vice and socket, or hammering methods
Removes sealed U-joint cups in minutes
Does not damage the driveshaft, yokes, joints, or bearing cups

YM1723A

ADD TO INQUIRY

INTERMEDIATE U-JOINT PULLER

U-joint puller designed to fit drivelines 1500 series and under

Removes sealed U-joint cups in minutes

Does not damage the driveshaft, yokes, joints, or bearing cups

Great for intermediate trucks, school buses, farm, and light industrial vehicles

Fits U-joints with bearing cups 1.25" to 1.7" O.D.

Newly designed to fit spicer spl 90 & 100 series drivelines

HEAVY-DUTY TRUCK U-JOINT PULLER

Quickly and easily removes sealed U-joint cups
Engineered for use with up to a one-inch impact wrench providing the ultimate "brute strength" for disassembling drivelines
Eliminates dangerous vice and socket, or hammering method
Does not damage the driveshaft, yokes, joints, or bearing cups
To work with U-joint bearing cups from 1.5" to 2.2" and will fit virtually all class 7 and 8 trucks and machinery fits all spicer drivelines 1610, 1710, 1760, 1810, 1880 spicer spl 140, 170, and 250 "life series" MERITOR (rockwell) 16N, 17N, 18N, 1710 MERITOR RPL 20" and 25 "permalube" series

EGR VALVE DISASSEMBLY TOOL (HYUNDAI / KIA)

Used to disassemble the exhaust gas recirculation (egr) valve without damaging the parts

Application : HYUNDAI / KIA 2.0 L OR 2.2 L diesel R-engine

1/2" DR. X 8 POINTS MITSUBISHI DIESEL FUEL FILTER WRENCH

To remove oil filter and drain fuel from the filter

Be sure to clean the o-ring surface before using the tool

Application:MITSUBISHI all new canter fourth phase eco-car 3.5 ton, 6.7 ton & 6.9 ton